The sixth generation of the Ford F-Series is a line of pickup trucks and medium-duty commercial trucks that were produced by Ford from 1972 to 1979. This generation was launched in December 1972 for the 1973 model year. These were the last generation of trucks to use the F-Series chassis introduced in 1965. After a decade as a compact SUV, the Bronco was redesigned as a shortened version of the F-Series. This generation also marks the introduction of the F-150, which today is the most popular model.
This generation is noted for the body panels' durability as Ford used extensive amounts of galvanized sheet metal to fight corrosion. In 1976, the F-Series became the best-selling trucks in America, a position it has continued to hold ever since.
Maps, Directions, and Place Reviews
Model history
1973-1975
In 1973, a new model was offered: the F-350 SRW (single rear wheel) pickup. This was a new heavy-duty pickups made with contractors and camping enthusiasts in mind. It rode on longer wheelbase than an F-100 or F-250 (140 in (3,600 mm) vs. 133 in (3,400 mm)) but had the same overall length. Ordering the Camper Special package for the F-350 SRW made it a "Super Camper Special", which was designed for the much heavier slide-in campers coming on the market at that time.
For 1974 (launched September 21, 1973), the F-Series became available in an extended cab for the first time. Dubbed the "SuperCab", it offered the six-passenger seating of the crew cab in a slightly shorter length, and competed with Dodge's Club Cab.
For 1975, the F-150 was introduced; as part of an effort to circumvent upcoming emissions requirements, this truck was designed with a heavier GVWR (over 6,000 lb (2,700 kg)) and maximum payload (2,275 lb (1,032 kg) when properly equipped) than the F-100. With the half-ton F-100 still in production, the new F-150 was informally referred to as the "heavy half-ton".
1976-1977
In 1975 (1976 model year), this familiar "split-grille" design was given a slight face lift to feature black accents around the headlights and a refined overall appearance.
1977 models received a redesign of exterior trim, with the cowl insignia's made smaller and moved near the windshield. The bed received a rectangular fuel door to hide the gas cap. The gas tank located behind the seat was discontinued due to safety concerns. It also would be the last year of the medium-duty F-500.
1978-1979
For 1978, the appearance of the F-Series changed the most since 1972, when the split grille was overhauled in favor of a single-piece grille insert design. Much larger than before, the grille no longer incorporated the headlights, turn signals or the " F O R D" letters. The headlights were located in housings beside the grille, and the park/turn signal lamps were located below them. Additionally, a new chrome-plated letter set reading "F O R D" could now be seen on the hood immediately above the grille. In 1977 (1978 models), the round headlight design was retained for the Custom trim level. A luxury "Lariat" trim was also introduced for 1978; Ranger, Ranger XLT, and Ranger Lariat trim levels incorporated rectangular headlights with optional chrome headlight bezels and the chrome grille insert. Dual Fuel tanks in the bed became standard. For 1979, round headlights were replaced by rectangular ones on all trim levels, and the surrounding grille insert that framed the headlights was now available in either black or chrome to match that of the aluminum grille frame. Also new for 1978 was the option of part- or full-time four-wheel-drive on SuperCab models. Full-time four-wheel drive utilized a chain-driven NP203 transfer case, while part-time four-wheel drive was equipped with a gear-driven NP205.
Lifted Ford F150 Video
Models
- F100 F101 F102 F103 F104 F105 F106 F107 F108 F109 F10N: 1/2 ton (4,550-5,700 GVWR max)
- F110 F111 F112 F113 : 1/2 ton (4×4)(5,250-6,500 GVWR max)
- F150 F151 : "heavy" 1/2 ton (6,050-6,200 GVWR max(6,050-6,500 GVWR max)
- F250 F251 F252 F253 F254 F255 F256 F257 F258 F259: 3/4 ton (6,200-8,100 GVWR max)
- F260 F261 F262 F263 F264 F265 F266: 3/4 ton (4×4) (6,500-8,400 GVWR max)
- F350 F350 F351 F352 F353 F354 F355 F356 F357 F358 F359 F35P: 1 ton (6,000-10,000 GVWR max)
- F-360: 1 ton (4×4) (8,550 GVWR max)
The GVWR ratings for these trucks was tied to a combination of wheel, spring, axle and brake combinations. The series code on the ID tag denotes which model and from that it can be determined what weight rating each vehicle has. 4×4 trucks can also be identified by the Vehicle Identification Number and on the ID plate as a serial number. For example, F10 is an F-100 2-wheel drive, but F11 is an F-100 4×4, and so on. Serial numbers beginning with an "X" are SuperCab models.
Trim
- Custom
- Ranger
- Ranger XLT
- Lariat (1978-1979)
An optional "Explorer" trim package was available with the "Ranger" trim level.
Powertrain
Australian production
Ford Australia assembled right-hand drive sixth generation F-Series that were fitted with a lineup of locally sourced engines.
1973-1975
Initially they were available with US sourced 240 and 300 CID Straight-6 engines. From August 1974 the 240 CID engine was replaced with locally sourced 250 CID Straight-6 and the 300 CID was replaced by the locally sourced 302 Cleveland V-8 engines. The 302 Cleveland was a destroked 351 Cleveland built using tooling exported to Australia after the closure of the Cleveland production line. The 302 Cleveland model was the first Australian Sixth Gen to receive an automatic transmission as an option. The Canadian built 4wd F-250 was added to the lineup in 1975 with the 300CID Straight-6 engine to supplement the locally assembled rear-wheel drive F-100, F-250 and F-350.
1976-1977
The 250CID Straight-6 was upgraded with a new crossflow head and rebadged as the 4.1 litre, increasing power and lowering emissions to meet new legislation being introduced in Australia. A locally assembled 4wd F-100 with Australian built engines was added to the lineup to replace the fully imported 4wd F-250.
1978-1979
In 1978, the 351 Cleveland V-8 replaced the 302 Cleveland V8 in the F-250 and F-350. The 302 Cleveland continued alongside the 351 Cleveland in the F-100. The 4.9 litre inline 6 cylinder continued to be sold across the range. In 1979, the F-250 and F-350 had an automatic gearbox as an option for the first time in Australia.
Ford Bronco
Starting in 1978, Ford redesigned their Ford Bronco and based it upon the F-150. The Bronco was now nearly similar to the F-150 with the addition of a removable camper shell. The new Bronco incorporated design characteristics which eliminated leaky roofs and body flex associated with other full size removable top utility vehicles of the era. This allowed Ford to compete better with the Chevrolet Blazer by offering a larger and more luxurious SUV while minimizing production costs since many (especially the most complex and expensive) parts were shared with the F-series trucks. The Bronco was only offered with the 351M and 400 V8 engines. Often when people modify 78-79 Bronco's, they will replace the standard Ford 351M or 400M V8 with the larger Ford 460 engines. It is also common to add lift kits and larger tires on the trucks to make them more suitable for off-road/trail use.
Medium-Duty
Largely unchanged since 1967, medium duty-trucks saw little change during the 1970s. Post-1973 models are most easily distinguished by their larger headlight surrounds in the grille in comparison to 1967-1972 models. In 1977, a 370 cubic-inch version of the 460 V8 replaced the previous FE engines. Shared with the L-Series trucks, the Caterpillar 3208 V8 became an option in F700 and F800 models; diesel-powered trucks were distinguished by an extra "0" (i.e., F-7000/F-8000). The lowest-GVWR F-500 was discontinued after 1977.
Source of the article : Wikipedia
EmoticonEmoticon